ABSTRACT
Objective To explore the potential common mechanism and active ingredients of Reduning Injection against SARS, MERS and COVID-19 through network pharmacology and molecular docking technology. Methods The TCMSP database was used to retrieve the chemical components and targets of Artemisiae Annuae Herba, Lonicerae Japonicae Flos and Gardeniae Fructus in Reduning Injection. The gene corresponding to the target was searched by UniProt database, and Cytoscape 3.8.2 was used to build a medicinal material-compound-target (gene) network. Three coronavirus-related targets were collected in the Gene Cards database with the key words of "SARS""MERS" and "COVID-19", and common target of three coronavirus infection diseases were screened out through Venny 2.1.0 database. The common targets of SARS, MERS and COVID-19 were intersected with the targets of Reduning Injection, and the common targets were selected as research targets. Protein-protein interaction (PPI) network map were constructed by Cytoscape3.8.2 software after importing the common targets into the STRING database to obtain data. R language was used to carry out GO biological function enrichment analysis and KEGG signaling pathway enrichment analysis, histograms and bubble charts were drew, and component-target-pathway network diagrams was constructed. The key compounds in the component-target-pathway network were selected for molecular docking with important target proteins, novel coronavirus (SARS-CoV-2) 3CL hydrolase, and angiotensin-converting enzyme II (ACE2). Results 31 active compounds and 207 corresponding targets were obtained from Reduning Injection. 2 453 SARS-related targets, 805 MERS-related targets, 2 571 COVID-19-related targets, and 786 targets for the three diseases. 11 common targets with Reduning Injection: HSPA5, CRP, MAPK1, HMOX1, TGFB1, HSP90AA1, TP53, DPP4, CXCL10, PLAT, PRKACA. GO function enrichment analysis revealed 995 biological processes (BP), 71 molecular functions (MF), and 31 cellular components (CC). KEGG pathway enrichment analysis screened 99 signal pathways (P < 0.05), mainly related to prostate cancer, fluid shear stress and atherosclerosis, hepatocellular carcinoma, proteoglycans in cancer, lipid and atherosclerosis, human T-cell leukemia virus 1 infection, MAPK signaling pathway, etc. The molecular docking results showed that the three core active flavonoids of quercetin, luteolin, and kaempferol in Reduning Injection had good affinity with key targets MAPK1, PRKACA, and HSP90AA1, and the combination of the three active compounds with SARS-CoV-2 3CL hydrolase and ACE2 was less than the recommended chemical drugs. Conclusion Reduning Injection has potential common effects on the three diseases of SARS, MERS and COVID-19. This effect may be related to those active compounds such as quercetin, luteolin, and kaempferol acting on targets such as MAPK1, PRKACA, HSP90AA1 to regulate multiple signal pathways and exert anti-virus, suppression of inflammatory storm, and regulation of immune function.Copyright © 2022 Drug Evaluation Research. All rights reserved.
ABSTRACT
The rapid response to the COVID-19 pandemic has resulted in increased municipal waste in the form of used face masks (FMs), which pose a global threat to the environment. To mitigate this, the study explores the applicability of shredded FMs as alternative reinforcing material in sands. Laboratory-grade Ottawa sand and naturally collected sea sand are adopted as the base sands for testing. The primary physical properties of the base materials and the FMs are first examined, and the soil particles are imaged via scanning electron microscopy. Thirty consolidated undrained (CU) triaxial compression tests were conducted to evaluate the effects of the weight fraction of FM, FM length, and the initial effective mean stress on the undrained shear strength parameters of the sands. The experimental results proved that FM inclusion can lead to a substantial improvement in the undrained shear strength of the sands;however, such improvement was sensitive to the initial effective mean stress, with higher undrained shear strength gains associated with lower initial effective mean stress. For a given FM content, the critical state ratio and angle of friction at the critical state increased with the FM length. Finally, the results revealed that FM-reinforced sands exhibit dilative and strain-hardening behaviors.
ABSTRACT
Current worldwide mRNA vaccination against SARS-CoV-2 by intramuscular injection using a needled syringe has greatly protected numerous people from COVID-19. An intramuscular injection is generally well tolerated, safer and easier to perform on a large scale, whereas the skin has the benefit of the presence of numerous immune cells, such as professional antigen-presenting dendritic cells. Therefore, intradermal injection is considered superior to intramuscular injection for the induction of protective immunity, but more proficiency is required for the injection. To improve these issues, several different types of more versatile jet injectors have been developed to deliver DNAs, proteins or drugs by high jet velocity through the skin without a needle. Among them, a new needle-free pyro-drive jet injector has a unique characteristic that utilizes gunpower as a mechanical driving force, in particular, bi-phasic pyrotechnics to provoke high jet velocity and consequently the wide dispersion of the injected DNA solution in the skin. A significant amount of evidence has revealed that it is highly effective as a vaccinating tool to induce potent protective cellular and humoral immunity against cancers and infectious diseases. This is presumably explained by the fact that shear stress generated by the high jet velocity facilitates the uptake of DNA in the cells and, consequently, its protein expression. The shear stress also possibly elicits danger signals which, together with the plasmid DNA, subsequently induces the activation of innate immunity including dendritic cell maturation, leading to the establishment of adaptive immunity. This review summarizes the recent advances in needle-free jet injectors to augment the cellular and humoral immunity by intradermal injection and the possible mechanism of action.
Subject(s)
COVID-19 , Humans , Injections, Intradermal , Injections, Jet , COVID-19/prevention & control , SARS-CoV-2 , Injections, IntramuscularABSTRACT
The sediments underneath Mexico City have unique mechanical properties that give rise to strong site effects. We investigated temporal changes in the seismic velocity at strong-motion and broadband seismic stations throughout Mexico City, including sites with different geologic characteristics ranging from city center locations situated on lacustrine clay to hillside locations on volcanic bedrock. We used autocorrelations of urban seismic noise, enhanced by waveform clustering, to extract subtle seismic velocity changes by coda wave interferometry. We observed and modeled seasonal, co- and post-seismic changes, as well as a long-term linear trend in seismic velocity. Seasonal variations can be explained by self-consistent models of thermoelastic and poroelastic changes in the subsurface shear wave velocity. Overall, sites on lacustrine clay-rich sediments appear to be more sensitive to seasonal surface temperature changes, whereas sites on alluvial and volcaniclastic sediments and on bedrock are sensitive to precipitation. The 2017 Mw 7.1 Puebla and 2020 Mw 7.4 Oaxaca earthquakes both caused a clear drop in seismic velocity, followed by a time-logarithmic recovery that may still be ongoing for the 2017 event at several sites or that may remain incomplete. The slope of the linear trend in seismic velocity is correlated with the downward vertical displacement of the ground measured by interferometric synthetic aperture radar, suggesting a causative relationship and supporting earlier studies on changes in the resonance frequency of sites in the Mexico City basin due to groundwater extraction. Our findings show how sensitively shallow seismic velocity and, in consequence, site effects react to environmental, tectonic and anthropogenic processes. They also demonstrate that urban strong-motion stations provide useful data for coda wave monitoring given sufficiently high-amplitude urban seismic noise.
ABSTRACT
Introduction: Povidone-iodine 1% and cetylpyridinium chloride 0.05% mouthwashes have been used to remove microbial plaque and reduce gingivitis and the dysfunction of COVID-19. The present research was conducted to determine these two types of mouthwash effects on the shear bond strength of orthodontic brackets in laboratory conditions. Method: In this experimental-laboratory research, healthy human premolar teeth were selected and preserved in 1% thymol. The samples were divided into three groups, including control and 0.05% cetylpyridinium chloride and 1% povidone-iodine mouthwashes. The shear bond strength values of the brackets were measured with a UTM device and with a blade speed of 1 mm/min After keeping each group in mouthwash and applying thermal cycles. The Adhesive Remnant Index (ARI) observed the amount of residual adhesive using a stereomicroscope at ten magnifications. The bond strength of brackets was investigated by one-way Analysis of Variance (ANOVA) in three groups, and pairwise comparisons were performed with Tukey's test. The chi-square test also analyzed the remaining adhesive degrees in the groups. Results: Significant differences were observed in the shear bond strength of brackets in three groups (p=0.02). The bond strength of the brackets in the povidone-iodine mouthwash group was significantly higher than the control group (p=0.01). However, in other pairwise comparisons, no significant differences were observed between the groups. There were no significant differences in the amount of residual adhesive in the different groups. Conclusion: Immersion in mouthwashes, effective against COVID-19, had no adverse effects on metal orthodontic brackets' shear bond strength values. Therefore, these mouthwashes can establish oral and dental hygiene and destroy COVID-19's function in orthodontic patients. [ FROM AUTHOR] Copyright of Journal of Pharmaceutical Negative Results is the property of ResearchTrentz and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full . (Copyright applies to all s.)
ABSTRACT
Recent studies have proven that the shape of the stenosis greatly affects the flow characteristics. The 2D rigid wall model examined in this research is analyzed mathematically using various principles and results of functional analysis for the existence and uniqueness of the solution. The model taken into consideration for the current study has also been used to examine the consequences of hyperviscosity in COVID-19 cases. The results of the investigation surmise that the maximum peak velocity of 3.155m/s and the minimum trough pressure of 7041.538Pa were manifested in the high slope geometry. Also, the number of spots over the upper wall of high slope geometry bearing the least wall shear stress was considerably high when compared to the other geometries. The study deduced that the arterial segment bearing dual high slope stenosis was more susceptible to new plaques, plaque ruptures, and hyper viscous syndrome. © 2023 THE AUTHORS
ABSTRACT
The Port of San Diego's B Street Pier facility (Pier) is the busiest cruise terminal in the City of San Diego with over a hundred ship calls annually (pre-COVID). The Pier is an approximately 9.4-acre bulkhead faced mole extending about 1,000 ft into San Diego Bay and approximately 400 ft wide. On the three offshore sides of the bulkheaded mole are marginal pile supported wharfs constructed in 1923. The upland side of the mole is a concrete gravity seawall constructed in 1900. The mole soils consist of hydraulically placed dredge spoils and are susceptible to liquefaction.The existing Pier containment walls are deemed inadequate for seismic loading, mainly due to the presence of liquefiable materials both in front of and behind the existing containment wall. A solution consisting of an improved Deep Soil Mixing (DSM) zone coupled with the installation of a new steel sheet bulkhead was selected to retrofit and upgrade the Pier to current seismic standards. A key aspect of the design was to minimize loading induced from the wharf onto the existing curtain wall during an earthquake. The DSM zone is intended to serve a triple purpose, that is to improve shear strength of the soils behind the curtain wall, to mitigate the impact of liquefaction, and to provide sufficient bearing for potential future lightly loaded structures which may be constructed on the Pier. To obtain a cost-effective design and limit the DSM zone extents, the design also needed to limit the seismic load contributions to the DSM from the marginal wharves during seismic conditions. A development plan consisting of a multi-phased construction plan was determined to meet the Port's capital improvement needs and budget. Phase I development will install the DSM zone and steel sheet pile bulkhead along the south and west face of the mole. Future work will include wharf pile and deck replacement along with completing curtain wall replacement along the north face of the mole. This paper presents the geotechnical design challenges and considerations associated with the design of the DSM and sheet pile system comprising Phase I of the development plan. Key aspects of the geotechnical design included the selection of appropriate liquefaction resistance of the DSM improved zone, designing for the lateral spread of the slope in front of the curtain wall, assessment of stability and deformation of the proposed sheet pile, and the determination of the seismic earth pressures. © ASCE.
ABSTRACT
A better understanding of the fluid dynamics of disease transmission by disintegrated respiratory droplets has been the focus of great attention since the recent outbreak of COVID-19. In particular, human respiratory activities such as coughing, sneezing and even talking and eating expel a large amount of pathogen-laden droplets. Particularly, during eating or drinking, the physical properties of saliva can be changed. In this study, we investigate the atomization morphology of expelled artificial saliva mixtures from the perspective of varying fluid physical properties, specifically surface tension and dynamic viscosity. Using high-speed shadowgraph experiments on artificial saliva, we visualize and analyse the disintegration of saliva liquid sheets into ligaments and droplets. We find that the viscosity and surface tension affect the droplet size formed from expelled saliva and follow scaling laws that have been previously observed and predicted for constant shear viscosity. We conclude that the changes in physical properties of saliva induced by eating and drinking tend to favour the formation of smaller droplets during sneezing or coughing, which could drive the airborne transmission pathway of pathogens. Furthermore, we derive a theoretical model based on scaling arguments that shows the breakup time of ligaments produced from the artificial saliva mixtures is dependent on the capillary number.
ABSTRACT
Health awareness has increased worldwide since the COVID 2019 pandemic, creating a strong demand for wearable electronics. Wearable sensors for monitoring a patient's health are prevalent to reduce medical costs and decrease in-person clinic visits. Integrating electronics into clothes is challenging because most fabrics are porous and incompatible with the existing manufacturing methods, such as screen printing. The indirect printing method was employed to fabricate electrical circuitry on a textile substrate by printing it on a heat transfer polymer (HTP) and attaching it to the target cloths by stitching or glueing. Such a fabrication process has the potential to lead the way in developing new intelligent clothes. However, the durability of the printed circuitry in this manufacturing process on a cloth is still unknown and requires investigation. Therefore, this paper's objective is to study the durability of printed circuitries on fabric by applying constant cyclic loading. The test vehicle is a printed conductive silver interdigitating circuitry on fabric. Another test vehicle on a polyethylene terephthalate (PET) substrate was fabricated for a benchmark. A constant cyclic loading at 1Hz at a 50% duty cycle was applied to the test vehicles 100,000 times. The printed circuitry was monitored by logging the voltage in an electrical voltage divider configuration while the sensor was pressed and released. The result indicates that the fabric test vehicle can still function after the 100,000 cycles of the cyclic loading test and is comparable to that on the PET substrate. The recorded voltage-to-force values of the printed sensor on the fabric drifted upward and downward up to 3% over the loading cycles. The optical microscope observation on the cyclic loading samples showed signs of shear stresses on the printed silver and electrically conductive films, which could cause the tips of the silver interdigitating fingers to shatter. The study indicates that the properly manufactured circuits on fabric can be reliable and utilized for wearable applications. © 2022 IEEE.
ABSTRACT
Using anti-COVID-19 mouthwashes has become necessary to reduce acute respiratory syndrome coronavirus 2 (SARS-CoV-2) transmissions. Resin-matrix ceramic (RMCs) materials that are exposed to mouthwashes may affect the bonding of repaired materials. This research was performed to assess the effects of anti-COVID-19 mouthwashes on the shear bond strengths (SBS) of RMCs repaired with resin composites. A total of 189 rectangular specimens of two different RMCs (Vita Enamic (VE) and Shofu Block HC (ShB)) were thermocycled and randomly divided into nine subgroups according to different mouthwashes (distilled water (DW), 0.2% povidone-iodine (PVP-I), and 1.5% hydrogen peroxide (HP)) and surface treatment protocols (no surface treatment, hydrofluoric acid etching (HF), and sandblasting (SB)). A repair protocol for RMCs was performed (using universal adhesives and resin composites), and the specimens were assessed using an SBS test. The failure mode was examined using a stereomicroscope. The SBS data were evaluated using a three-way ANOVA and a Tukey post hoc test. The SBS were significantly affected by the RMCs, mouthwashes, and surface treatment protocols. Both surface treatment protocols (HF and SB) for both RMCs, whether immersed in anti-COVID-19 mouthwash or not, improved the SBS. For the VE immersed in HP and PVP-I, the HF surface treatment had the highest SBS. For the ShB immersed in HP and PVP-I, the SB surface treatment had the highest SBS.
ABSTRACT
Recent research has shown that individuals suffering from COVID-19 are accommodating an elevated level of blood viscosity due to the morphological changes in blood cells. As viscosity is a major flow parameter influencing the flow across a stenosis or an aneurysm, the examination of the significance of hyperviscosity in COVID patients is imperative in arterial pathologies. In this research, we have considered a patient-specific case in which the aneurysm is located along the abdominal aortal walls. Recent research on the side effects of COVID-19 voiced out the various effects on the circulatory system of humans. Also, as abdominal aneurysms exist very often among individuals, causing the death of 150-200 million every year, the hyper-viscous effects of blood on the flow across the diseased aorta are explored by considering the elevated viscosity levels. In vitro explorations contribute considerably to the clinical methods and treatments to be regarded. The objective of the present inquest is to research the flow field in aneurysmatic-COVID-affected patients considering the elastic nature of vessel walls, using the arbitrary Lagrangian-Eulerian approach. The study supports the various clinical findings that voiced the detrimental effects associated with blood hyperviscosity. The simulation results obtained, by solving the fluid mechanics' equations coupled with the solid mechanics' equations, employing a FEM solver suggest that the elevated stress imparted by the hyper-viscous flows on the walls of the aneurysmal aorta can trigger the fastening of the aneurysmal sac enlargement or rupture.
ABSTRACT
Although multimodal ultrasound approaches have been suggested to potentially improve the diagnosis of thyroid cancer; the diagnostic utility of the combination of SWE and malignancy-risk stratification systems remains vague due to the lack of standardized criteria. The purpose of the study was to assess the diagnostic value of the combination of grey scale ultrasound assessment using EU TIRADS and shear wave elastography. 121 patients (126 nodules-81 benign; 45 malignant) underwent grey scale ultrasound and SWE imaging of nodules between 0.5 cm and 5 cm prior to biopsy and/or surgery. Nodules were analyzed based on size stratifications: <1 cm (n = 43); 1-2 cm (n = 52) and >2 cm (n = 31) and equivocal cytology status (n = 52), and diagnostic performance assessments were conducted. The combination of EU TIRADS with SWE using the SD parameter; maintained a high sensitivity and significantly improved the specificity of sole EU TIRADS for nodules 1-2 cm (SEN: 72.2% vs. 88.9%, p > 0.05; SPEC: 76.5% vs. 55.9%, p < 0.01) and >2 cm (SEN: 71.4% vs. 85.7%, p > 0.05; SPEC: 95.8% vs. 62.5%, p < 0.01). For cytologically-equivocal nodules; the combination with the SWE minimum parameter resulted in a significant reduction in sensitivity with increased specificity (SEN: 60% vs. 80%; SPEC: 83.4% vs. 37.8%; all p < 0.05). SWE in combination with EU TIRADS is diagnostically efficient in discriminating nodules > 1 cm but is not ideal for discriminating cytologically-equivocal nodules.
ABSTRACT
In patients with COVID-19-induced pneumonia, shear wave elasticity (SWE) was used to assess liver stiffness. This study included 48 cases of COVID-19-induced pneumonia and 48 cases of normal physical examination. Basic and clinical data, including aspartate aminotransferase (AST), were evaluated. Color ultrasonography was used to test the liver's SWE. A biopsy of the liver was also performed. In patients with COVID-19-induced pneumonia, AST and alanine aminotransferase (ALT) levels were higher than those in the control group. Liver SWE showed that liver stiffness is hard (8.745 ± 0.2104) compared with the control group (7.386 ± 0.1521) (P < 0.0001). Pathological biopsy showed that liver inflammation accounted for 89.58%, steatosis accounted for 81.25%, necrosis accounted for 10.42%, and fibrosis accounted for 33.33% in patients with COVID-19-induced pneumonia. ROC curve analysis showed that the SWE is highly sensitive and specific for the diagnosis of liver inflammation and steatosis. The sensitivity was 88.76% and the specificity was 77.01% for the evaluation of liver inflammation. For steatosis, the sensitivity was 90.20%, and the specificity was 78.40%. The SWE of liver is useful to assess liver function and pathological status in COVID-19 patients.
Subject(s)
COVID-19 , Elasticity Imaging Techniques , Fatty Liver , Humans , Liver Cirrhosis/pathology , Ultrasonics , COVID-19/diagnostic imaging , COVID-19/pathology , Liver/diagnostic imaging , Liver/pathology , Fatty Liver/pathology , Inflammation/pathologyABSTRACT
Due to the COVID-19 pandemic, disposable face-masks were excessively used around the world, which led to severe environmental problems. The main purpose of this research is to test the possibility of reinforcing a sandy soil with mask fibers to reuse pandemic-generated waste materials. When testing the compaction properties, the sand was reinforced with a fiber content that increased from 0% to 0.5%, with successive small increments of 0.1%. An optimum content of 0.1% remarkably increased the maximum dry density of the soil and dropped its optimum moisture content. Add to that, it was noticed that 15 mm and rectangular chips were respectively the optimum fiber length and shape to maximize the improvement of the sand compaction properties. Regarding the shear strength, fiber contents of 0.1%, 0.25%, and 0.5% were adopted. The direct shear tests have shown that the highest enhancement was observed for an optimum fiber content of 0.25%. Similarly to compaction tests, 15 mm and rectangular chips were respectively the optimum fiber length and shape to extremely enhance the shear resistance of the tested sand.
ABSTRACT
Background: Computational fluid dynamics (CFD) simulations, in-vitro setups, and experimental ex-vivo approaches have been applied to numerous alveolar geometries over the past years. They aimed to study and examine airflow patterns, particle transport, particle propagation depth, particle residence times, and particle-alveolar wall deposition fractions. These studies are imperative to both pharmaceutical and toxicological studies, especially nowadays with the escalation of the menacing COVID-19 virus. However, most of these studies ignored the surfactant layer that covers the alveoli and the effect of the air-surfactant surface tension on flow dynamics and air-alveolar surface mechanics. Methods: The present study employs a realistic human breathing profile of 4.75s for one complete breathing cycle to emphasize the importance of the surfactant layer by numerically comparing airflow phenomena between a surfactant-enriched and surfactant-deficient model. The acinar model exhibits physiologically accurate alveolar and duct dimensions extending from lung generations 18 to 23. Airflow patterns in the surfactant-enriched model support previous findings that the recirculation of the flow is affected by its propagation depth. Proximal lung generations experience dominant recirculating flow while farther generations in the distal alveolar region exhibit dominant radial flows. In the surfactant-enriched model, surface tension values alternate during inhalation and exhalation, with values increasing to 25 mN/m at the inhalation and decreasing to 1 mN/m at the end of the exhalation. In the surfactant-deficient model, only water coats the alveolar walls with a high surface tension value of 70 mN/m. Results: Results showed that surfactant deficiency in the alveoli adversely alters airflow behavior and generates unsteady chaotic breathing through the production of vorticities, accompanied by higher vorticity magnitudes (100% increase at the end of exhalation) and higher velocity magnitudes (8.69% increase during inhalation and 11.9% increase during exhalation). In addition, high air-water surface tension in the surfactant-deficient case was found to induce higher shear stress values (by around a factor of 10) on the alveolar walls than that of the surfactant-enriched case. Conclusion: Overall, it was concluded that the presence of the surfactant improves respiratory mechanics and allows for smooth breathing and normal respiration.
ABSTRACT
This study aimed to examine the testicular functions with sperm analysis of patients with COVID-19. The study was carried out with male patients aged between 18 and 50 years with positive RT-PCR test and SARS-CoV-2 virus between December 2020 and April 2021. A total of 103 participants were included in the study. The mean age was 31.24 ± 5.67 (19-45) years and the mean body mass index of the participants was 28.41 ± 4.68 kg/m2 . The patients were divided into two groups, group-1 was patients who had COVID-19, group-2 was healthy men. A semen analysis of both groups was performed, and the serum total testosterone, FSH, LH, anti-mullerian hormone and Inhibin-B tests were analysed and recorded. The testicular dimensions and testicular densities were examined by ultrasound and elastography for both groups. Comparing the patient and control groups results, this study found that the sperm count per 1 cc (p = 0.01) and total motility (p = 0.01) in group-1 was lower than in the control group, the testicular dimensions decreased (for right testis group-2 was 15.39 ± 4.78 ml versus group-1 was 12.11 ± 4.62 cm3 p < 0.01, for left testis group-2 was 16.01 ± 5.12 versus group-1 was 11.92 ± 4.78 cm3 ; p < 0.01), and the shear wave velocities were significantly higher in group-1 patients. In conclusion, sperm parameters deteriorate in men who have symptomatic disease with SARS-CoV-2 infection. The fact that the cause of this deterioration is characterized by changes at the cellular level in the testis raises doubts about the persistence of this condition.
Subject(s)
COVID-19 , Testis , Adolescent , Adult , Anti-Mullerian Hormone , Follicle Stimulating Hormone , Humans , Inhibins , Luteinizing Hormone , Male , Middle Aged , SARS-CoV-2 , Semen , Semen Analysis , Sperm Count , Sperm Motility , Spermatozoa , Testis/diagnostic imaging , Testosterone , Young AdultABSTRACT
INTRODUCTION: 4D XStrain speckle tracking echocardiography (STE) is a feasible newer technology to evaluate the strain and rotational deformation of left ventricle (LV). We aimed to exhaustively present the normal value ranges of LV strain and twist parameter in healthy Indian adults during COVID-19 pandemic and furthermore to analyse their relationship with age and gender. METHOD: Study population consisted of 80 adults of 18-60 years (58 men, 22 women), which was arbitrarily divided into two groups: Group A <30 years and Group B >31 years. RESULTS: GLS was higher in females (P<0.01) and in Group A (P<0.01). On the contrary GCS and GRS were higher in men (P=NS) and in Group B (P<0.01), at the mitral valve level. At the papillary muscle level GCS and GRS values are more in men (P<0.01) and in <30 years of age (P<0.01 and P<0.05 respectively). Furthermore, the values of numerous other strain parameters-GLSR, GCSR, GRSR, LGV, TV, TS, TSR, Shear, Shear rate, ROV and RV, reflected heterogeneous variation across gender and various age groups. Twist was greater in men and increased with increasing age (P<0.01). CONCLUSION: We have demonstrated a comprehensive data obtained in the current study utilizing 4D XStrain STE in healthy subjects. The LV speckle tracking software simultaneously provided 4D volumetric, strain, rotation and twist data in great detail. However, this distinctive technology has not been widely adopted and its evaluation is still limited to research applications. Therefore, further clinical studies are needed to validate our findings.
ABSTRACT
BACKGROUND: Chlorhexidine, which is the gold-standard antimicrobial mouthwash, cannot effectively decrease the count of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which is the causative agent for coronavirus disease-2019 (COVID-19). Since SARS-CoV-2 is susceptible to oxidation, mouthwashes containing oxidizing agents such as hydrogen peroxide (H2 O2) or Povidone-iodine (PVP-I) are recommended to decrease the viral count. AIM: This study aimed to assess the effects of H2 O2 and PVP-I mouthwashes on the shear bond strength (SBS) of metal orthodontic brackets to the enamel. MATERIALS AND METHODS: This in vitro experimental study evaluated 45 freshly extracted maxillary premolars. The teeth were cleaned and randomized into three groups (n = 15) for rinsing with distilled water (control group), 1% PVP-I (betadine), and 1.5% H2 O2 for 60 s. All teeth were etched with 37% phosphoric acid gel, and metal orthodontic brackets were bonded to the teeth using the Transbond XT bonding system. The teeth were mounted in auto-polymerized acrylic resin and incubated in water at 37°C for 72 h. The teeth were then thermocycled for 48 h, and their SBS was measured in a universal testing machine. The adhesive remnant index (ARI) score was also calculated. The groups were compared by ANOVA and Chi-square Monte Carlo test. RESULTS: No significant difference was noted among the three groups in SBS (p = 0.938) or the ARI score (p = 0.780). CONCLUSION: Use of H2 O2 and PVP-I mouthwashes has no adverse effect on SBS or mode of failure of metal orthodontic brackets bonded to enamel.
ABSTRACT
INTRODUCTION: To assess the placental elasticity using point shear wave velocity (pSWV) in pregnant women who had recovered from coronavirus COVID-19. METHODS: A total of 40 pregnant women who had recovered from moderate severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and 40 healthy pregnant women were included in this study. We evaluated placental elasticity by using transabdominal pSWV method. Three measurements were made, and their average was accepted as the mean placental velocity value in each case. The results were compared between the post-COVID-19 and control groups. RESULTS: The mean pSWV values were significantly higher in the post-COVID-19 group compared to the control group, indicating that the women with a history of COVID-19 had stiffer placentas. Furthermore, the pSWV values were significantly and positively correlated with the uterine artery pulsatility index. We also found that the NICU requirement was statistically higher in the post-COVID 19 group. DISCUSSION: The pregnant women who had recovered from COVID-19 had rigid placentas than the healthy controls. The use of pSWV for the assessment of placental velocity may provide valuable information in the diagnosis and management of post-COVID-19 patients as a complementary tool to the existing ultrasonography methods.